Actuator, Waterra Hydrolift-2 (Electric)
Over the years, Waterra has developed and improved a line of devices to assist in the operation of the Waterra Inertial Pump. Although the inertial pump is a simple device, the manual operation of the pump can sometimes be a strenuous experience. Purging and sampling deep wells or a large number of monitoring wells can leave the operator quite exhausted. Today, we sell a full line of portable actuators that will operate the inertial pump, even in the deepest of monitoring wells. These machines will deliver a significant boost to field productivity.
The Hydrolift-2 is a portable, electrically operated device that is used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor (available in either 110 volt or 220 volt) and generates a 4 inch stroke at up to 200 cycles per minute. The Hydrolift II weighs only 38 pounds and requires an electrical power supply of at least 1000 watts.
This actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 150 feet.
This actuator is the ideal choice for the frequent user of the Inertial Pumping System with moderate to extreme pumping requirements.
|Dimensions||15" length, 20" height, 7" width (38cm L x 51cm H x 18cm W)|
|Weight||38 lbs (17.25 kg)|
|Powered by||3/4 hp (6 amps) volt DC electric motor|
|Performance Characteristics||Generates a 4" stroke,
adjustable 0—180 cycles/min
|Additional Requirements||110 VAC or 220 VAC power supply|
|For Use With||Inertial Pumping Systems — Standard Flow, High Flow, Low Flow|