ION Science PTXSLBMP-0517, TIGER SELECT - PPM - Handheld Benzene Detector

SKU:
ION PTXSLBMP-0517
$4,730.00
$4,559.99
You save $170.01
Shipping:
Calculated at Checkout

Description

ION Science PTXSLBMP-0517, TIGER SELECT - PPM - Handheld Benzene Detector

 A revolutionary hand-held detector, Tiger Select can be operated either with a benzene pre-filter tube to detect benzene selectively, or without to detect total aromatic compounds (TAC). For simplicity and ease of use, the Tiger Select has been split into two, user-friendly modes: Basic and Advanced. Both modes are user-selectable. Utilizing the high output Ion Science 10.0 eV lamp configuration, a reading for total aromatic compounds (TACs) is seen immediately on startup. Should aromatics be detected, an Ion Science benzene pre-filter tube can be easily attached to ensure rapid detection and selective measurement of benzene. Tiger Select can also provide 15 minute short term exposure limits (STELs) and 8 hour time weighted averages (TWAs) for TACs. Throughout the measurement process, Tiger Select continues to display real time data, ensuring the final reading represents the full value of actual benzene present. Benzene concentrations are displayed down to ppb levels, giving you the most accurate, reliable data you can count on.

In addition, the unique MiniPID 2 sensor incorporates both anticontamination technology and Fence Electrode technology for extended operation in difficult working environments. Tiger Select can also be used in standard operational mode without the use of a benzene pre-filter tube to deliver active indications of volatile organic compounds (VOCs), including benzene at concentrations as low as 1 ppb benzene equivalent. Additionally, Tiger Select may be used alongside the Cub TAC personal PID monitor to provide the ultimate solution for benzene  etection. Visit www.ionscience/cub for more details.

Applications Include:

• Confined space entry pre-screening during refinery and plant maintenance screening during refinery and plant maintenance
• Marine spill response
• Refinery down-stream monitoring
• Hazardous material response
• Total Aromatic Compounds (TAC) detection at loading docks and barge operations 

The Fire Investigation Kit Includes:

• Tiger Select Instrument with rubber boot
• Rechargeable Battery (Li ion)
• Battery Charger
• Mains Adaptor
• Probe Tube (60mm)
• Benzene Pre filter Tube Probe
• Ion Science Benzene Pre filter Tubes x 10
• Draeger Benzene Pre filter Tube Opener
• Rugged Case
• Carbon Zero Filter Assembly
• Calibration Adaptor
• PTFE Filter Discs
• Removal Tool MiniPID Stack
• PID Lamp Cleaning Kit
• Lanyard
• USB Cable

Tiger Select - PPM / H&S / Data Logging 

PTXSRBMP-0000 TIGER SELECT Benzene Detector Specifications
Minimum Resolution

Select ppm

• Standard running mode 0.1 ppm

• TAC 0.01 ppm

• Tube mode 0.001 ppm

Minimum Resolution

Select ppb

• Standard running mode 0.001 ppm

• TAC 0.001 ppm

• Tube mode 0.001 ppm

Maximum Reading

• Standard mode 20,000 ppm or 20,000 mg/ m3 (gas dependent)

• Tube mode 200 ppm or 639 mg/m3 benzene

Response Time • 120 seconds. Progressive indication of benzene breakthrough is displayed in real time
Accuracy 10% display reading one digit benzene
Linearity 5% display reading one digit
Intrinsically Safe Approvals

• II 1G EX ia IIC T4 Ga
• Tamb= -15 0C ≤Ta ≤+45 0C
(with lithium ion battery pack)
• Tamb = - 15 0C ≤Ta ≤+40 0C
(with alkaline battery pack)
• ITS09ATEX26890X IECEx ITS 10.0036X
• 3193491 conforms to UL Std. 913, 61010-1 &

• Certified to CAN/CSA
Std. C22.2 No. 61010-1

Battery Life

• Li-ion: life up to 24 hours, charge time 6.5 hours

• Alkaline: (Duracell Procell MN 1500) life up to 8.5 hours continual use

Lamps 10.0 eV Krypton PID lamp 
Data Logging Including date / time: 120,000 data points
Calibration • 2 and 3 point calibration (via calibration kit accessory)
Communication

Direct USB 1.1 connection

Alarm

• Flashing LED's Amber (low alarm) Red (high alarm)

• Sounder 95 dBA at 300 mm (12") vibration on alarm

• Pre programmed TWA and STEL*

 

Flow Rate • 220 ml/min 
Temperature • Operating: -20 to 60 0C, -4 to 140 0F (non-Intrinsically Safe)
• Humidity: 0-99% RH (non condensing)
Protection • Designed to IP65 (heavy rain)
• 1180
• EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A
Weight & Dimensions

• Instrument (probe fitted, no tube attached)
Height: 465 x Width: 89 x Depth 61 mm (18.3 x 3.5 x 2.4”)

Instrument Weight 0.75kg

Standard case

Packed Weight: 5kg (176oz)

Best available photoionization (PID) detection

• PID independently verified as best performing on the market
• Unrivalled sensitivity detects down to ppb levels
• Selectively detects benzene with Ion Science benzene pre filter tube
• Continuous readings shown as max level reached
• In built humidity resistance with no need to compensate
• Anti contamination design for extended field operation

Ease of Use

• Self explanatory software and calibration routine
• Easy change sensor, electrode stack and lamps
• Large user friendly key pad
• Simple, one handed operation

Minimize Downtime

• Ready to use instantly with no complicated set up
• Large battery capacity gives several days of use
• Fast charge capability gets you up and running quickly
• Simple menu requires no user training
• Fastest data download via true USB connection
• Easily upgrade your instrument via the web 24/7

Safety

• Accurate results in all
environmental conditions
• Intrinsically safe; meets ATEX,
IECEx, North American and
Canadian standards

Low Cost Operation

• Inexpensive consumables and parts
• 5 year warranty when instrument
registered online

 

Extra Information

Brand:
ION
Weight:
11.00 LBS

Warranty Information

5 year manufacturer warranty when instrument registered online